NETGEAR 7300S manual Set gvrp interfacemode all, Show gvrp configuration

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

set gvrp interfacemode all

This command enables GVRP (GARP VLAN Registration Protocol) for all ports.

Default	disabled
Format	set gvrp interfacemode all
Mode	Global Config

no set gvrp interfacemode all

This command disables GVRP (GARP VLAN Registration Protocol) for all ports. If GVRP is disabled, Join Time, Leave Time and Leave All Time have no effect.

Format	no set	gvrp interfacemode all
Mode	Global	Config

show gvrp configuration

This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.

Format	show gvrp configuration {<slot/port> all}
Mode	Privileged EXEC and User EXEC
Interface	Valid slot and port number separated by forward slashes.
Join Timer	Specifies the interval between the transmission of GARP PDUs registering (or
	re-registering) membership for an attribute. Current attributes are a VLAN or
	multicast group. There is an instance of this timer on a per-Port, per-GARP par-
	ticipant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 sec-
	onds). The factory default is 20 centiseconds (0.2 seconds). The finest
	granularity of specification is 1 centisecond (0.01 seconds).
Leave Timer	Specifies the period of time to wait after receiving an unregister request for an
	attribute before deleting the attribute. Current attributes are a VLAN or multi-
	cast group. This may be considered a buffer time for another station to assert
	registration for the same attribute in order to maintain uninterrupted service.
	There is an instance of this timer on a per-Port, per-GARP participant basis. Per-
	missible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory
	default is 60 centiseconds (0.6 seconds). The finest granularity of specification
	is 1 centisecond (0.01 seconds).
LeaveAll Timer	This Leave All Time controls how frequently LeaveAll PDUs are generated. A
	LeaveAll PDU indicates that all registrations will shortly be deregistered. Par-
	ticipants will need to rejoin in order to maintain registration. There is an
Switching Commands	8-101

202-10088-01, March 2005