User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Chapter 5

Command Line Interface Structure

The Command Line Interface (CLI) syntax, conventions and terminology are described in this section. Each CLI command is illustrated using the structure outlined below.

CLI Command Format

Commands are followed by values, parameters, or both.

Example 1

network parms <ipaddr> <netmask> [<gateway>]

network parms is the command name.

<ipaddr> <netmask> are the required values for the command.

[<gateway>] is the optional value for the command.

Example 2

snmp-server location <loc>

snmp-server location is the command name.

<loc> is the required parameter for the command.

Example 3

clear vlan

clear vlan is the command name.

Command

The text in bold, non-italic font must be typed exactly as shown.

Command Line Interface Structure

5-1

202-10088-01, March 2005

Page 51
Image 51
NETGEAR 7300S manual CLI Command Format