Record Menu, continued
Record List
Figure 16
To see a list of all currently programmed recordings, select the record list option on the Record menu or press GUIDE while viewing the Recording setup screen. A maximum of 32 recordings can be scheduled. To page through the list, press CH 
or 
.
To Cancel Scheduled Recordings
To remove a recording from the record list, use 
or 
to highlight the scheduled recording and then press
CANCEL.
To Cancel a Recording in Progress
1.Press DEVICE to display the Device Selection menu.
2.Highlight the icon for the source device and verify that the icon for the recording device apears in the connection section.
3.Press CANCEL
Figure 16. Record List screen
TV Guide On Screen® and the Record List
Programs scheduled through TV Guide On Screen do not appear on this record list. Refer to the separate TV Guide On Screen® User’s Guide for information regarding scheduling recordings with TV Guide On Screen.
If there is a conflict between recordings scheduled through TV Guide On Screen and the Record List, the TV Guide On Screen recording takes priority.
Default Digital (Record) Device
This setting allows you to choose the default device to use when recording digital programs using the REC key from within ChannelView™ (page 60) or TV Guide On Screen®. Use this option only if you have more than one recording device set up in Netcommand.
A digital recording can be made on either a digital or analog device. For best playback quality, however, record digital programs on a digital recording device. Not that analog recordings can only be made on the one analog device connected to RECORD OUTPUT (usually a VCR) and are not affected by this setting.
If multiple devices were not connected and then added in the NetCommand setup, this setting will be unavailable (grayed out).
Analog Recordings
When you record a 16:9 digital channel to an analog VCR or recording device, there is a mismatch between the picture shape of the 16:9 ratio of the source and the narrower 4:3 ratio of the analog recorder.
•For anamorphic playback on this widescreen TV, choose the anamorphic picture display and ensure that the TV screen format is set to standard (see the section on TV formats in this Owner’s Guide).
•For cropped playback on an older style 4:3 TV, choose the cropped display to remove the top and bottom sections. This setting does not affect recording from analog devices, analog channels, or 4:3 digital channels.
Setting Up Analog Recordings with TV Guide On Screen®
When setting up a recording using TV Guide On Screen, note that:
•You must select the desired recording device in the TV Guide On Screen Record Options menu.
•Analog programs can only be recorded to an analog recording device, such as a VCR.
•Analog programs cannot be recorded to digital devices such as A/V discs or DVCRs.
•The destination recording device for analog programs must be the analog device connected to the TV’s RECORD OUTPUT jacks.
IMPORTANT
When setting up analog recordings in TV Guide On Screen, you must set the destination recording device as the analog device connected to the TV’s RECORD OUTPUT jacks.
Chapter 5. TV Menu Operations | 71 |
