Mitsubishi Electronics WD-62628, WD-52628, WD-73727 manual Operation of PIP and POP

Operation of PIP and POP

You can display programs from analog channels, analog inputs, or analog devices as picture-in-picture (PIP) and picture-outside-picture (POP). The TV has a second analog tuner for non-scrambled analog channels received on ANT‑1 and displays them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but cannot be the sub-picture. PC screens can be viewed as the main picture with PIP.

Press PIP/POP to activate the PIP/POP option. With each press of the PIP/POP button on the TV remote control, (within seconds of each press), the PIP/POP cycles through the following display options:

		Side-by-side
		pictures
MAIN		(Not available
PICTURE	Side-by-Side	when PC is
		source)

			3 POP
		POP 1	(Not available
MAIN			when PC is
		POP 2	source)
PICTURE
		POP 3
			PIP
Ant-1 2 XXXX		PIP Ant-1 17
Standard			(PC as main
Stereo SAP
TV-PG DLSV			picture only)
SQV1
	PIP
			PIP off
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1

To turn PIP/POP off, wait at least 10 seconds and then press PIP/POP. The next time you activate PIP/POP, the last-used PIP/POP option will be displayed.

Changing PIP/POP Device

When PIP is displayed, press PIP DEVICE to change the PIP picture source device. A menu similar to the Device Selection menu will be displayed.

Changing PIP/Side-by-Side Channels

Press PIP CH to scroll up and down through memorized channels on ANT-1 and ANT-2.

Exchanging Program Images

Press EXCH to exchange the main picture and the PIP/ POP picture. Pictures from digital channels can only be shown as the main picture. PC images can only be the main picture. If you press EXCH while viewing images from a PC, the TV exchanges audio with the PIP but leaves the main image in place.

Moving a PIP Image

If no menus are on screen, press ADJUST , , , or to move the PIP display anywhere on the main screen. When the main picture is from a PC, the PIP can be moved through four designated positions.

Automatic POP Switching

When automatic POP switching is active, the TV cycles through memorized analog channels on Ant-1 or Ant-2 or strobe pictures from other A/V components in the POP display. Press PAUSE to pause or restart automatic POP switching.

Selecting POP “Live” Image

Press ADJUST to select a different POP “live” image (automatic POP switching must be paused.)

Freezing the PIP and Side-by-Side Pictures

Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image.

IMPORTANT

•The side-by-side option cannot show the same channel or device on both sides.

•If ANT-1 or ANT-2 is the main picture, ANT‑2 is not available as a PIP, POP, or side-by-side image.

•PIP/POP is not compatible with signals from memory cards.

•You can view only one HDMI input at a time with the PIP/POP or side-by-side feature.

86Chapter 6. Additional Features