MediaCommand™ and Memory Card Playback

Warning: Some memory cards available on the market are not properly certified to follow the card type specifications noted below and cannot be used by the card reader. If you experience problems with the reading of your file, please transfer your files to a properly certified card.

Memory Card Slots

Inserting a memory card

1.Insert a card into a matching card slot on the front of the TV. Be sure to use the correct card slot. Card 1 accepts SmartMedia™. Card 2 accepts MultiMediaCard™ and SD Media Card. Card 3 accepts CompactFlash® and MicroDrive®. Card

4 accepts MEMORY STICK™ and Memory Stick Pro. Cards up to 1 GB, with a file format of FAT 16 (block size = 1024 or 2048) are supported.

Normally the label side should be up, but if the card does not fit, try turning the card over and insert again. When properly inserted, the light next to the slot will light up.

2.Press DEVICE on the remote control to display the Device Selection Menu and then select the correct

card slot from the list, using ADJUST .

3.The Media Dialog box (figure 1) will automatically display. Use the AUDIO button to switch from JPEG Picture Slide show setup to MP3 or WMA7 Audio Playlist setup, or use the VIDEO button on the remote to switch from the MP3 or WMA Audio Playlist setup to JPEG Picture Slide show setup.

Don’t pull the memory card out while it is playing.

For Slideshow, press PLAY. For Thumbnails, press GUIDE. To redisplay this menu or to setup, press DEVICE MENU.

For Playlist, press AUDIO.

Figure 1. Media Dialog Box

4. On the remote control, press:

PLAY: to start the slide show or play audio.

GUIDE: to display the JPEG Thumbnail menu (Figure 2) or Audio track playlist (Figure 3)

DEVICE

MENU: to display the Media Setup menu (Figure 4 ).

Remote Control Buttons for Controlling the Playback

For JPEG Picture Slide show:

PLAY:

begins or resumes slide show playback

PAUSE:

pauses or resumes playback while in the

 

automatic advance mode.

FF:skips to the next slide.

REW:

returns to the previous slide.

FORMAT:

single press rotates the slide 90˚. Multiple

 

presses continue to rotate the slide.

STOP:

Stop slide show, return to memory card

 

screen.

For MP3 or WMA Audio Playback

PLAY:

begins or resumes playlist playback.

PAUSE:

pauses or resumes playback.

FF:skips to the first track/song.

REW:

skips to the previous track/song.

STOP:

Stop playback and returns to memory card

 

screen.

Using the Picture Thumbnail Menu or Audio Playlist Menu

For JPEG Picture Thumbnail Menu:

Figure 2

1.Press GUIDE on the remote to display the JPEG picture Thumbnail menu.

2.Press ADJUST to move the highlight to different images (CH up/down will change pages of the Thumbnail menu). Use REW to go to the first slide and FF to go to the last slide on the page.

3.Press FORMAT to rotate the selected image 90˚ (pressing FORMAT four times will rotate the image completely around to the original position).

4.Press PLAY to begin playback of the Slide show from the selected image. The Thumbnail menu will be taken down.

Figure 2. JPEG Thumbnails

84Chapter 6. Additional Features

Page 84
Image 84
Mitsubishi Electronics WD-52628, WD-73727, WD-62628 manual MediaCommand and Memory Card Playback, Memory Card Slots