Front Control Panel
The shaded buttons on the front control panel are duplicated on the remote control. The top row of labels shows the control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control functions when the TV menus are displayed on the screen or when a special function has been activated. See “Remote Control Overview” for further details on the functions of these buttons.
4:45&.
3&4&5
2 | 3 | 4 | 5 | 1 | Models |
|
1 | 3 | 4 | 1 | 5 | 2 | 1 Model |
Front Control Panel |
|
|
|
|
|
|
1. Shaded buttons duplicate buttons on the remote control | 2. System Reset | 3. Lamp indicator | ||||
4.Status indicator 5. Power/Timer indicator
4:45&. 3&4&5
If the TV does not respond to either the remote control or the front panel controls and/or does not power off, press the SYSTEM RESET button with a pointed item, such as the end point of a paperclip. The TV will turn off and the TIMER light will flash quickly for about one minute. When the TIMER light stops flashing, you may again turn on the TV. The changes you made the last time the TV was on before you used the SYSTEM RESET button may be lost. Any changes that you previously saved are not lost.
Front-Panel Indicator Lights
Lamp Indicator
Indicator Color | TV Condition | Additional Information |
|
|
|
None (indicator off) | Normal TV on or standby condition. | Normal operation. |
|
|
|
Green, rapid blinking | TV just powered off and lamp is | Begins to blink 30 seconds after turning off TV. TV |
| cooling. | can be turned on before it begins to blink or after the |
|
| blinking stops, but not while the indicator is blinking. |
|
| Normal operation. |
|
|
|
Yellow, steady | Lamp nearing end of useful life. | This is a recommendation to have a new lamp ready |
|
| before the current lamp stops illuminating. See |
|
| Appendix H for ordering information. |
Yellow, blinking | 1. Lamp access door is open or not | TV will not operate until lamp access door is secure. |
| secure. | See Appendix H for installation information. |
|
|
|
| 2. No lamp installed. | TV will not operate without a lamp. See Appendix H |
|
| for installation information. |
|
|
|
Red, steady | Lamp no longer illuminates and has | Replace the lamp. The TV will not operate when |
| reached the end of the lamp life. | the lamp no longer illuminates. See Appendix H for |
|
| installation information. |
|
|
|
12Chapter 1. Television Overview
