Single Play
During playback, when Single Play and Auto Cue are Off, and the end of a track is reached the next track automatically starts playing.
During playback, when Single Play is On, and the end of a track is reached the PMD670 auto- matically pauses. This differs from Auto Cue in that Single Play does not cue to start of audio.
Default is S.Play Off.
1. Select the S.Play menu choice:
a.From stop, press and hold the 
MENU button for about 2 seconds. MENU will appear (flashing) in the display.
b.While MENU is flashing (for about 3 sec- onds) press and release the ENTER button 
. The last Menu choice selected will appear.
(If the flashing MENU times out start over at a.)
2.Press and release the FWD/+ button 
repeatedly until S.Play is displayed and flashing.
3.Press and release the ENTER button 
to accept the S.Play choice and switch to On or Off.
4.Press and release the FWD/+ button 
or the 
to toggle between ON and OFF.
5.When correct Press and release the ENTER button 
to switch to S.Play flashing.
6.Press and release the FWD/+ button 
to switch to another menu choice, or press and release the 
MENU/STORE button to write the menu change(s) and return to stop mode.
Beep
When battery charge can provide no more than
If the PMD670 is not operated for 30 minutes during stop or play pause, power can be auto- matically shut off to conserve battery life. (See A.PowOFF next page.) If A.PowOFF is set to Y, and Beep is set to ON, the PMD670 will beep to alert you that the power is shutting off.
Default is Beep On.
1. Select the Beep menu choice:
a.From stop, press and hold the 
MENU button for about 2 seconds. MENU will appear (flashing) in the display.
b.While MENU is flashing (for about 3 seconds) press and release the ENTER button 
. The last Menu choice selected will appear. (If the flashing MENU times out start over at a.)
2.Press and release the FWD/+ button 
repeatedly until Beep is displayed and flash- ing.
3.Press and release the ENTER button 
to accept the Beep choice and switch to On or Off.
4.Press and release the FWD/+ button 
or the 
to toggle between ON and OFF.
5.When correct Press and release the ENTER button 
to switch to Beep flashing.
- 34 -
