Marantz PMD670 manual Skip, Edit mode, How to renumber tracks, EDL A-B looping, Erase

Press and release the MARK/ EDIT button to tab through the EDL Mark types: Point, Skip, Loop_A, Loop_B, and Erase. When the type you want to change the EDL Mark to is flashing press and release the ENTER button .

TRACKTIME

L

-dB00402012620 over

R

-dB

MARK

Writing will be displayed briefly and the PMD670 will return to stop mode.

Skip

An EDL Mark changed to 'Skip' will be skipped during EDL playback (playback with EDL PLAY switch at ON). Playback will skip to the beginning of the next EDL Mark.

A skipped EDL recording is not erased. The recording is still on the CF card. The skipped EDL recording will play if the EDL PLAY switch is at OFF. You can change the type later.

Edit mode

Edit mode includes: Renumber (renumber tracks), TrkERASE (erase a track), TrkMkERASE (erase an EDL mark), AllMkERASE (erase all EDL marks), and FOR- MAT (format the CF card).

How to renumber tracks

If you have erased tracks from the CF card it is easier to locate recordings if the tracks are renumbered.

From stop press and hold the MARK/ EDIT button for about 2 seconds to enter Edit mode.

Renumber flash- ing in the display.

While Renumber is flashing (5 seconds) press and release the ENTER button . (Or press and release the STOP button to cancel.)

EDL A-B looping

To playback an EDL A-B loop press the PLAY/ PAUSE button to begin playback then press and release the A-B REPEAT button.

If there is an error, for example there is an EDL Mark of type Loop_A but no EDL Mark of type Loop_B an error message is displayed.

	TRACK TIME
Example	L
	-dB0040	201262	0 over
	R
display.			-dB
	TRACK

Only one EDL A-B loop can programmed. When a 'Loop_A' or 'Loop_B' exists on a CF card and another is created the old mark automatically changes to a 'Skip'.

Erase

When an EDL mark is erased the remaining EDL marks are automatically renumbered from 1 through the number of EDL marks on the CF card.

EXECUTING will be displayed and the percent- age executing will increase to 100%.

100% done will be displayed momentarily. Then the PMD670 and the display will return to stop mode.

How to erase tracks

From stop press and hold the MARK/ EDIT button for about 2 seconds to enter Edit mode.

Renumber flashing in the display.

While Renumber is flashing (5 seconds) press and release the MARK/ EDIT button again.

TrkERASE flashing in the display.

While TrkERASE is flashing (5 seconds) press and release the ENTER button .

- 20 -