Marantz PMD670 manual Auto Cue

Auto Cue

Auto Cue skips the silence at the beginning of an audio track and pauses playback at the point where the sound is loud enough for long enough. You can adjust how loud (how many dB) and how long (milliseconds) the audio has to be before playback is cued.

If S.Play is selected (see next page), when the end of the track is reached Auto Cue pauses playback cued to the sound of the next track.

Default settings are Off, 20 milliseconds, and -40 dB.

1. Select the A.Cue menu choice:

a.From stop, press and hold the MENU button for about 2 seconds. MENU will ap- pear (flashing) in the display.

b.While MENU is flashing (for about 3 seconds) press and release the ENTER button . The last Menu choice selected will appear. (If the flashing MENU times out start over at a.)

2.Press and release the FWD/+ button repeatedly until A.Cue is displayed and flashing.

-dB

3.Press and release the ENTER button to accept the A.Cue choice and switch to On or Off.

-dB

4.Press and release the FWD/+ button or the -/REW button to toggle between On and Off.

5.When correct Press and release the ENTER button to switch to set or change millisec- onds.

-dB

6.Press and release the FWD/+ button or the -/REW button to change the number of milliseconds of sound exceeding the threshold. The range is 5 to 60 in five milli- second increments.

7.When correct Press and release the ENTER button to switch to the decibel threshold level.

-dB

8.Press and release the FWD/+ button or the -/REW button to change the decibel threshold level. The range is -60dB to -20dB in 5dB increments.

9.When correct Press and release the ENTER

button to switch to A.Cue flashing.

-dB

10.Press and release the FWD/+ button to switch to another menu choice, or press and release the MENU/STORE button to write the menu change(s) and return to stop mode.

- 33 -