Marantz PMD670 manual Controls and Connections Top continued

Controls and Connections Top continued

TRACK JUMP	- /REW	FWD / +
REC
UNDO
MARGIN RESET	PLAY / PAUSE	STOP
I / O MENU/STORE	ENTER	CANCEL

MENU/STORE button

The PMD670 Menu lets you preset various parameters. To access the Menu with POWER on and the PMD670 in Stop:

4	3
TRACK JUMP	- /REW	FWD / +
REC
UNDO
MARGIN RESET	PLAY / PAUSE	STOP
I / O MENU/STORE	ENTER	CANCEL

23

MARGIN RESET

i / OMENU/STORE

23.MARGIN RESET/ I/0 MENU/STORE button

Several functions depend- ing on state of the PMD670.

12, 5

Menu operations

1.Press and hold the MENU/STORE button for about 2 seconds. MENU will appear (flashing) in the display.

		TIME
Example	REC REMAIN	L
		-dB	00	402012620 over
		R
display:				-dB
			INT
			MIC

MARGIN RESET button

During record press and release to reset the peak level margin.

Example display

with level margin at	TRACKTIME	R
		L
-02dB before press-		-dB	00	40	20	12	6	20 over
	TRACK		MIC
								-dB
			INT
ing the MARGIN
RESET button.		level margin

The level margin displays the highest level achieved since the track began or the MARGIN RESET button was pressed and released. OV indicates a margin over 0dB.

I/O button

Connects the CF card via the I/O port to a con- nected device (usually a computer).

From power off press and hold the I/O button while you slide the POWER switch on the PMD670 to the right to power on.

This display appears.

The CF card in the PMD670 appears as an external drive on a connected computer.

Power off to disconnect.

See page 43, How to connect via the I/O port.

2.While MENU is flashing (for about 3 seconds) press and release the ENTER button . The Menu choice will appear. If the flashing MENU times out start over at 1.

The last Menu choice entered appears, the following starts from the Date/Time menu choice.

3.Press and release the FWD/+ button

4.or the -/REW button to tab through the menu choices.

The rest of the menu setting procedure differs slightly depending on the menu item. In general you:

5.Press and release the ENTER button to select a menu choice.

6.Press and release the FWD/+ button or the -/REW button to change the menu setting.

7.Press and release the ENTER button to confirm the menu setting.

- 24 -