Marantz PMD670 manual Custom playback sequences, 16, 17, 18. MARK/ EDIT buttons, EDL Marks

OFF	ON	STEREO		0dB	-20dB
		L	R
AUTO MARK		ANALOG OUT		MIC ATTEN
OFF	ON	SINGLE			FLAT
		OFF	ALL
PRE REC					ANC
				LIMITER
OFF	ON	OFF	ON	ALC	MANUAL
INPUT LOCK		EDL PLAY		LEVEL CONT.
				EDIT
INPUT	A-B REPEAT			MARK

16 17 18

EDIT

Edit functions: editing EDL Marks to create custom playback sequences, erasing and renum- bering Tracks, and formatting the CF card.

Custom playback sequences

EDL Marks are numbered consecutively from 001 and automatically renumbered when an EDL Mark is added or erased. Playback is also con- secutive from the point that playback begins.

MARK

16, 17, 18. MARK/ EDIT buttons

This button group

EDL Mark custom playback can:

controls EDL Marks and Editing functions.

EDL Marks

Mark functions: manually adding Marks, and locating Marks.

Adding EDL Marks

Press and release the MARK/ EDIT button to manually add an EDL Mark during recording.

Press the MARK/ EDIT button during pause, recording, or playback to add an EDL Mark. During recording adding an EDL Mark introduces an audible click in the recording when using the internal microphone.

Locating EDL Marks

From Stop press and release the Mark forward button (18) or Mark reverse button (16) to tab through the EDL marks on the CF card.

EDL Mark location as recording time from the beginning of the track.

Example display.

TRACKTIME

L

-dB00402012620 over

R

-dB

MARK dis- MARK

played (instead
of TRACK)	EDL Mark	EDL Mark type
	number

To start playback from the displayed EDL Mark press and release the PLAY/PAUSE button.

Skip playback from the beginning of a 'Skip' EDL Mark to the beginning of the next EDL Mark.

A-B loop from a 'Loop_A' EDL Mark to a 'Loop_B' EDL Mark.

Note: EDL Marks are not automatically placed at the beginning of tracks. If you want your custom playback sequence to include track beginning points add EDL Marks to coincide with track beginning points by:

a.Start playback by pressing and releasing PLAY/Pause and then pause playback by pressing and releasing PLAY/Pause again.

b.Press and release TRACK JUMP forward or TRACK JUMP reverse until the desired track number is displayed.

c.Press and release the MARK/ EDIT button.

Editing EDL Marks:

All EDL Marks are initially entered as 'Point' marks.

From Stop display the EDL Mark by pressing and releasing the Mark forward button (18) or Mark reverse button (16) to tab through the EDL marks on the CF card.

When the EDL mark to be edited is displayed press and release the MARK/ EDIT button. The current EDL Mark type will be flashing.

Example display.

19	-
19	-
- 19 - 19	-
19	-
19

TRACKTIME
L
-dB	00	40	20	12	6	2	0 over
R

-dB

MARK