TROUBLESHOOTING
Basic problem solving with an amplifier is similar to troubleshooting any other electrical or electronic equipment. Always check the most obvious possible causes first. To give you a few ideas of what to look for, check the following:
Problem | Possible Cause | Remedy |
No power when MAINS | Mains plug not inserted | Plug in securely |
POWER switch is operated | fully into rear socket |
|
No sound | Tape monitor function has | Switch off tape monitor |
| been selected on the pre- | at the |
| amplifier |
|
| Wrong connections between | Check audio input lead |
| connections | |
| Speakers not connected, or | Check speaker cables |
| incorrectly wired |
|
The sound is not precise, | Speakers are connected out of | Ensure method of conn- |
lacking bass and stereo | phase, i.e. connections to one- | ection is the same for left |
image | speaker (+ and | and right speakers |
|
|
|
If none of these actions effect a cure, please contact your dealer, or an authorised Musical Fidelity service agent. Remember, never open the case of the A3.2 CR Power amplifier your- self, as this will invalidate the guarantee.
Issue 1: April 2002 | A3.2 C R Power | Instructions for Use Page 6 of 7 |
