GENERAL ADVICE

INSTALLATION PRECAUTIONS and USER INFORMATION

Your new A3.2 CR power amplifier is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions:

Heed all warnings shown on the back of the product.

Only connect the A3.2 CR amplifier to a mains outlet having the same voltage as marked at the back of the unit.

Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.

Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by items placed on them.

Do not use near water, or place water-filled containers on the amplifier, for example, flower vases or potted plants. If water does spill inside, immediately pull out the mains plug from the wall socket and inform your dealer, who should then check the unit before further use. Entry of liquid into the amplifier is dangerous, and may cause electric shock or fire hazard.

Do not place the unit near heat sources such as radiators, direct sunlight or other equipment. The case of this amplifier can run at high temperatures - operate the unit in a well ventilated area, and do not touch the side heatsink fins after periods of use at high output power.

Do not remove covers or try to gain access to the inside. There are no internal user adjust- ments. Refer all service work to an authorised Musical Fidelity agent.

NOTE: Unauthorised opening of the equipment will invalidate any warranty claims.

There are fuses inside the A3.2 CR amplifier. In the unlikely event that one blows, refer the unit to your audio dealer. Do NOT try to replace the fuse yourself as this will invalidate the war- ranty.

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may harm the surface finish.

The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by lightning. For protection of your audio system during electrical storms, remove the mains plugs and disconnect any aerial lead.

If after-sales service is required, to help your dealer identify the A3.2 CR amplifier please quote the serial number located on the rear panel of the unit.

RADIO FREQUENCY INTERFERENCE (R.F.I)

This product has been tested to ensure that its operation is not adversely affected by normal background levels of R.F.I., and that it does not itself generate excessive amounts of interfer- ence. However, if a problem persists, please contact your Musical Fidelity agent.

Issue 1: April 2002

A3.2 C R Power

Instructions for Use Page 3 of 7

Page 2 Page 4
Page 3
Image 3
Musical Fidelity A3.2 CR General Advice, Installation Precautions and User Information, Radio Frequency Interference R.F.I
Page 2 Page 4

A3.2 CR specifications

Musical Fidelity A3.2 CR is a highly regarded integrated amplifier known for its exceptional performance and versatility, making it a staple in high-fidelity audio systems. This model offers a harmonious blend of advanced technology, user-friendly features, and a robust build quality, highlighting the brand's commitment to delivering audiophile-grade sound.

One of the standout characteristics of the A3.2 CR is its impressive power output. With a rated output of 100 watts into 8 ohms and even more at lower impedance levels, this amplifier ensures that it can drive a wide range of speakers effectively. The unit’s power supply is intricately designed with dual transformers to provide ample current, resulting in rich, dynamic sound reproduction with low distortion levels.

The A3.2 CR is equipped with a plethora of input options, including five line-level RCA inputs, a dedicated balanced XLR input, and a tape-recorder output. This versatility allows users to connect multiple sources, making it an excellent choice for those who wish to integrate various components into their audio setups. The addition of a front-mounted headphone jack also caters to those who prefer private listening sessions without compromising on sound quality.

One of the notable technologies found in the A3.2 CR is its Class A/B amplification. This design combines the efficiency of Class B operation with the high linearity and sound quality of Class A. As a result, users can enjoy a warm and detailed sound, characterized by a smooth midrange and well-defined bass response. The amplifier's signal path is optimized to minimize interference and maintain audio integrity, ensuring that the sound remains true to the source material.

The A3.2 CR also features an advanced volume control system, which utilizes a motorized potentiometer for precise adjustments. This aspect of the design enhances user convenience and guarantees a consistent listening experience. Additionally, the amplifier houses high-quality components, including capacitors and resistors, selected for their excellent performance, reliability, and longevity.

In terms of aesthetics, the A3.2 CR boasts a sleek aluminum chassis with a minimalist design approach, appealing to both modern and traditional audio enthusiasts. The emphasis on build quality is evident, making the amplifier not only a functional piece of equipment but also a visually appealing component of any audio system.

Overall, the Musical Fidelity A3.2 CR stands out as a robust, feature-rich integrated amplifier that delivers a captivating audio experience. With its combination of power, versatility, and quality engineering, it remains a noteworthy choice for audiophiles seeking to elevate their listening experience.
Top Page Image Contents