Nikon COOLPIXS4100PLM user manual 181, Troubleshooting, Playback is set to Auto info for Monitor

Troubleshooting

Problem		Cause/Solution	A
Monitor is hard to read.	•	Adjust monitor brightness.	152
	•	Monitor is dirty. Clean monitor.	171
	•	If camera clock has not been set, “Date not	22, 149
		set” indicator blinks during shooting and
		movie recording. Pictures and movies
		recorded before clock is set are dated “00/00/
Date and time of recording are		0000 00:00” or “01/01/2011 00:00”
not correct.		respectively. Set the correct time and date
		from the Time zone and date option in the
	•	setup menu.
		Check camera clock regularly against more	149
		accurate timepieces and reset as required.
No indicators displayed in	Playback is set to Auto info for Monitor		152
monitor.	settings in the setup menu.
Print date not available.	Time zone and date setting is not applied in		22, 149
	the setup menu.
Date not appearing on pictures	•	The current shooting mode is one that does
even when Print date is	•	not support Print date.	153
enabled.		Date cannot be imprinted on movies.
Time zone and date setting
screen appears when the	Clock battery is exhausted; all settings were		22, 150	Technical
camera is turned on.
	restored to their default values.
Camera settings reset.
				Notes
	Battery temperature is high. Turn off camera and
Monitor turns off, and the	allow battery to cool down before resuming use.			and
	After the lamp blinks for three minutes, the		21
power-on lamp blinks rapidly.
	camera will turn off automatically. Pressing the			Index
	power switch also turns off the camera.

181