Line Commands
90 IOLAN Device Server User’s Guide, Version 1.0
Line Commands

Line Commands

Set Line

Description Configures line parameters.
User Level Normal, Admin
Syntax set line [data-bits 5|6|7|8] [dial none|in|out|both]
[idle-timer <0-4294967>] [line-name <name>]
[modem-name <config_modem>] [pages 1|2|3|4|5|6|7]
[parity none|even|odd|mark|space] [phone-number <phone_number>]
[rev-sess-security on|off] [sess-timer <0-4294967>]
[stop-bits 1|2|1.5] [termtype wyse60|vt100|ansi|dumb|tvi925|
ibm3151te|vt320|hp700|term1|term2|term3]
Admin set line ... [break on|off] [flowin on|off] [flowout on|off]
[hotkey-prefix <00-7f>] [initial cli|menu] [keepalive on|off]
[lock on|off] [motd on|off] [reset on|off] [user <name>]
[nouser]
Options data-bits
Specifies the number of bits in a byte. The default is 8.
dial
Determines how a modem will work on the line. If your user is remote and will be
dialing in via modem or ISDN TA, set this parameter to In; if the Device Server is
being used as a router, set this parameter to either In, Out, or Both, depending on which
end of the link your Device Server is situated and how you want to initiate the
communication.
idle-timer
Enter a time period, in seconds, for which the idle timer will run. Use this timer to close
a connection because of inactivity. When the idle timer expires, the Device Server will
end the connection. The maximum value is 4294967 seconds (about 49 days). The
default value of 0 (zero) means the idle timer will not expire, so the connection is
permanently open.
line-name
Provide a name for the line so it can be easily identified. The Remote Port Buffering
logging feature uses the Line Name when creating a file on the remote NFS server.
modem-name
The name of the predefined modem that is used on this line.
pages
For DSLogin line service, this is the number of video pages the terminal supports. Valid
values are 1-7. The default is 5 pages.
parity
Specifies if you are using Even, Odd, or No parity on the line. If you want to force a
parity type, you can specify Mark for 1or Space for 0.
phone-number
The phone number to use when Dial is set to Out.