Command Line Interface 105
Administration Commands

Time/Date Setting Commands

Set Date

Description Sets the Device Server’s system clock.
User Level Admin
Syntax

Show Date

Description Shows the date, according to the Device Server system clock.
User Level Normal, Admin
Syntax
Administration Commands

Bootup Commands

Reboot

Description Reboots the Device Server. You will be prompted to save configuration to FLASH, if
there have been unsaved configuration changes.
User Level Admin
Syntax

Reset

Description Resets the user profile or serial line to the default factory configuration.
User Level Admin
Syntax

Reset Factory

Description Resets the Device Server to the factory configuration.
User Level Admin
Syntax

Save

Description Saves the configuration to FLASH.
User Level Admin
Syntax

Set Bootup

set date <dd/mm/yyyy>
show date
reboot
reset user|line
reset factory
save
Description Specifies remote the TFTP host and pathname for files to be loaded after a Device
Server reboot.
User Level Admin
Syntax set bootup firmware host <hostname> [file <path_filename>]
set bootup configuration host <hostname> [file <path_filename>]
Options firmware file
The path and file name (do not use a drive letter), relative to the default path of your
TFTP server software, of the update software for the Device Server that will be loaded
when the Device Server is rebooted.