Command Line Interface 79
Server Commands

Show Server

Description Shows the parameters set for the server.
User Level Admin
Syntax
Hardware Commands

Set Ethernet

Description Sets the serial line speed and duplex.
User Level Admin
Syntax
Options auto|10-half|10-full|100-half|100-full

Show Hardware

Description Shows the hardware settings/information.
User Level Normal, Admin
Syntax
spcd
SPC (Trueport) daemon process in the Device Server on port 688.
syslog
Syslog client process in the Device Server.
dmgrd
DeviceManager daemon process in the Device Server. If you disable this service, you
will not be able to connect to the Device Server with the DeviceManager application.
DeviceManagerD listens on port 33812 and sends on port 33813.
show server
set ethernet speed-and-duplex
auto|10-half|10-full|100-half|100-full
Define the ethernet connection speed at one of the following:
zauto—automatically detects the ethernet interface speed and duplex
z10 Mbps Half Duplex
z10 Mbps Full Duplex
z100 Mbps Half Duplex
z100 Mbps Full Duplex
show hardware