Black Box LEH1008A-2MMST, LEH906A-2SFP, LEH908A, LEH906A-2MMST manual Command-Line Management

Chapter 7: Command-Line Management

3.Command Syntax: poe scheduling enable

4.Example:

The following example enables PoE scheduling to the interface fe1 (port 1): switch_a(config)#interface fe1

switch_a(config-if)#poe scheduling enable switch_a(config-if)#

PoE Schedule:

1. Command Mode: Interface mode

Logon to Configure Mode (Configure Terminal Mode).

Then logon to Interface mode.

fe1 means port 1.

The switch_a(config-if)# prompt will show on the screen. switch_a(config)#interface fe1

switch_a(config-if)#

2. Usage:

Use this command to set PoE scheduling to this port.

3. Command Syntax:

poe schedule-time DAY HOUR

DAY <0-6> specifies Sunday ~ Saturday to Switch.

HOUR <0-23> specifies hours to Switch.

no poe schedule-time DAY

4. Example:

The following example sets PoE scheduling to the interface fe1 (port 1): switch_a(config)#interface fe1

switch_a(config-if)#poe schedule-time 3 0-10,12,14-20, 22-23 switch_a(config-if)#

724-746-5500 blackbox.com Page 129