![](/images/new-backgrounds/1103569/103569335x1.webp)
Chapter 7: Command-Line Management
SNMP v1/v2c
Get Community Name:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen. switch_a(config)#
2. Usage:
Use
3. Command Syntax:
NAME The get community name for SNMP.
4. Example:
The following example specifies get community name (name) for SNMP:
Set Community Name:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen. switch_a(config)#
2. Usage:
Use
3. Command Syntax:
NAME The set community name for SNMP.
4. Example:
The following example specifies set community name (name) for SNMP:
Page 168 |