![](/images/new-backgrounds/1103569/103569373x1.webp)
Chapter 7: Command-Line Management
3. Command Syntax:
(no) ip igmp snooping mrouter interface IFNAME IFNAME Specify the name of the interface
4. Example:
The following example shows interface fe1 (port 1) statically configured to be a multicast router interface on vlan1.1: switch_a(config)#interface vlan1.1
IGMP passive snooping:
Report suppression:
1. Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
2. Usage:
Use ip igmp snooping
3. Command Syntax:
(no) ip igmp snooping
4. Example:
The following example enables report suppression for IGMPv2 reports on vlan1.1: switch_a(config)#interface vlan1.1
Force Forwarding Port:
1. Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen. switch_a(config)#
2. Usage:
Use this command to force forward multicast packet to interface before the interface receiving IGMP query.
Page 187 |