Efficient Networks 107-0001-000 manual WAN Interface Commands

Efficient Networks® Router family	Chapter 7: WAN Interface Commands
Command Line Interface Guide

CHAPTER 7

WAN INTERFACE COMMANDS

This chapter contains subsections of commands applicable to specific WAN interfaces. The subsections are:

•ADSL (Asymmetric Digital Subscriber Line) commands, see ADSL Commands.

•ADSL, Annex B commands, see GTI Commands.

•ATM (Asynchronous Transfer Mode) commands, see ATM Commands.

•DMT (Discrete Multi-Tone) commands, see DMT Commands.

•Dual-Ethernet commands, see Dual-Ethernet Router (ETH) Commands.

•Frame Relay commands, see Frame Commands.

•HDSL (High-speed Digital Subscriber Line) commands, see HDSL Commands.

•IDSL (ISDN Digital Subscriber Line) commands, see IDSL Commands.

•SDSL (Symmetric Digital Subscriber Line) commands, see SDSL Commands.

•G.shdsl commands, see SHDSL Commands.

NOTE:

If you are unsure which set of commands is applicable to your system, enter a ? at the command prompt and look for one of the WAN interface key words listed in the top- level command listing. The response, for example sdsl or adsl, indicates the appropriate command set to use.

Efficient Networks® Page 7-1