Epson 8900 Series manual Raster Graphics Commands

To provide compatibility with TI 857 where n is an ASCII value NUL through ACK (hexadecimal value 00 through 06 or decimal value 0 through 6).

n = 0 for black n = 1 for blue n = 2 for red

n = 3 for yellow n = 4 for green n = 5 for purple n = 6 for orange

Raster Graphics Commands

The following paragraphs describe the commands that control the raster graphics feature in the Model 855 DP emulation mode. To find the values of n1 and n2 for any of the following commands, modify the procedure described for the Select 60 dpi Graphics command in Chapter 4. In step 1 of the procedure, substitute the appropriate dot density value for 60.

Select 60 dpi Graphics

Escape sequence:	ESC	K	n1	n2
Hexadecimal:	1B	4B	n1	n2

Select 72 dpi Graphics

Escape sequence:	ESC	N	n1	n2
Hexadecimal:	1B	4E	n1	n2

Select 120 dpi Graphics

Escape sequence:	ESC	L	n1	n2
Hexadecimal:	1B	4C	n1	n2
Escape sequence:	ESC	J	n1	n2
Hexadecimal:	1B	4A	n1	n2

Select 144 dpi Graphics

Escape sequence:	ESC	O	n1	n2
Hexadecimal:	1B	4F	n1	n2

TI Model 855 Printer DP Emulation 6-17