Epson 8900 Series manual Set Left Margin at Column N, Set Right Margin at Column N

Set Left Margin at Column N

Escape sequence:	ESC	[	N	s
Hexadecimal:	1B	5B	N	73

The variable N can be any value in the range of 1 through, the column immediately to the left of the current right margin value, as determined by the line width setting. For example, if the current right margin is at column 80, the valid range of N is 1 through 79. If N equals 0, the left margin equals the default value.

Set Right Margin at Column N

Escape sequence:	ESC	[	;	N	s
Hexadecimal:	1B	5B	3B	N	73

The variable N can be any value in the range of the current left margin value through the value of the right-most column, as determined by the current line width setting. If N equals 0, the right margin equals the default value.

Set Left and Right Margins at Columns N1 and N2

Escape sequence:	ESC	[	N1	;	N2	s
Hexadecimal:	1B	5B	N1	3B	N2	73

This command sets the left and right margins to the columns specified by N1 and N2, respectively. The N1 and N2 limits are, respectively, the same as for the Set Left Margin at Column N and the Set Right Margin at Column N commands.

Set Line Width to n Columns

Escape sequence:	ESC	:	n
Hexadecimal:	1B	3A	n

The variable n can be any value in the range of 0 through 127 for 7-bits or 0 through 227 for 8-bits.

Restore Default Line Width

Escape sequence:	ESC	;
Hexadecimal:	1B	3B

This command sets the line width to the value currently selected by the Form Select switch.

TI Model 880 Printer Emulation 4-18