Efficient Networks 107-0001-000 manual Remote setipslaveppp, Use periodic echo

Chapter 6: Remote Commands	Efficient Networks® Router family
	Command Line Interface Guide

Parameters Cont.

multicast Allows the remote router to forward IP multicast traffic.

lanconfig Accept LAN configuration information. Indicates that this PPP remote can receive IPCP information for dynamically recon- figuring the Ethernet interface.

lcpecho	Use periodic echo.
<routername>a	Name of the remote router

aASCII string

Response

Command prompt.

remote setipslaveppp

Sets the IP Slave PPP mode. If the slave mode is yes, the router accepts the IP address that the remote end informs the router that it has; the router disregards any IP address specified in its own configuration. If the mode is no, the router tries to use the address in its configuration.

Normally there is no need to change the default (no) value of this option. However, in certain situations where the router is managed by another party, (as part of a managed service), you could set this value to yes to ensure that the central management site always specifies the IP address of the router.

Mgmt Class

Network (R/W)

Input Format

remote setipslaveppp yes no <remotename>

Parameters

yes no	Slave mode setting. The default is no.
<remotename>a	Name of the remote router.

aASCII string

Response

Command prompt.

Page 6-48 Efficient Networks®