Efficient Networks 107-0001-000 manual Ike peers set localid

Efficient Networks® Router family	Chapter 12: IKE/IPsec Commands
Command Line Interface Guide

Parameters

<ipaddress>a	IP address.
<peername>b	Name of the IKE peer whose address is specified. c

aDotted-decimal notation

bASCII string

cTo see the peer names, use the ike peers list command.

Example

-> ike peers set address 0.0.0.0 my_aggressive_peer

Response

Command prompt.

ike peers set localid

Sets the local ID for the IKE peer connection. This command is used when aggressive mode has been selected by the ike peers set mode command for this peer name.

The local ID must match the peer ID on the other end of the connection. The local ID can be an IP address, domain name, or e-mail address as specified by the ike peers set localidtype command. For more information, see “IKE Peer Commands” on page 5-56.

Mgmt Class

Security (R/W)

Input Format

ike peers set localid <aggressivemodeid> <peername>

Efficient Networks® Page 12-33