Efficient Networks 107-0001-000 manual Eth ip addserver

Chapter 5: Ethernet Interface Commands	Efficient Networks® Router family
	Command Line Interface Guide

eth ip addserver

This Network Address Translation (NAT) command adds a server’s IP address (on the LAN) associated with this interface for a particular protocol. For more information, see “Network Address Translation (NAT)” on page 4-17of the Technical Reference Guide.

To delete a server designation, use the command eth ip delserver.

Mgmt Class

Network (R/W)

Input Format

eth ip addserver <action> <protocol> <first port> [<last port> [<first private port>]] <interface>

Parameters

<action>	One of the following command actions:
	<ipaddr>a	Selects the host with this IP address as
		server.
	discard	Discards the incoming server request.
	me	Sends the incoming server requests to
		the local router, regardless of the IP ad-
		dress.
<protocol>	Protocol used by the selected server.
	<protocolid>b	Numerical protocol ID.
	tcp	TCP only.
	udp	UDP only.
	all	All protocols.
<first port>	First or only port as seen by the Ethernet interface. Port
	used by the selected server.
	<portid>c	Numerical port value; a value of 0
		matches any port.
	ftp	File Transfer Protocol (FTP) port.
	h323	H.323 port.
	http	Hypertext Transfer Protocol (HTTP)
		port.

aDotted-decimal notation

bInteger

cInteger, 0 - 65,535

Page 5-10 Efficient Networks®