Efficient Networks 107-0001-000 manual Ike ipsec proposals set espenc, Abled in the router

Efficient Networks® Router family	Chapter 12: IKE/IPsec Commands
Command Line Interface Guide

ike ipsec proposals set espenc

Sets the proposal parameter that determines whether ESP encryption is requested and, if it is requested, the encryption method used.

For more information, see “ESP and AH Security Protocols” on page 5-51.Or, see “IKE IPSec Proposal Commands” on page 5-58.

Mgmt Class

Security (R/W)

Input Format

ike ipsec proposals set espenc <des 3des null none> <proposalname>

Parameters

des	Use ESP encapsulation and 56-bit encryption.
3des	Use ESP encapsulation and 168-bit encryption (if 3DES is en-
	abled in the router)
null	No encryption, but use ESP encapsulation. Headers are inserted
	as though the data was encrypted. This allows verification of the
	source, but sends the data in the clear, increasing throughput.
none	No encryption and no ESP encapsulation. (If you select this option,
	the encapsulation method must be requested by a ike ipsec propos-
	als set espauth or ike ipsec proposals set ahauth command.)

<proposalname>a Name of the IPsec proposal to which the ESP encryption parame- ter is added.b

aASCII string

bTo see the proposal names in use, use the ike ipsec proposals list command.

Example

-> ike ipsec proposals set espenc 3des myproposal

Response

Command prompt.

Efficient Networks® Page 12-27