Efficient Networks 107-0001-000 manual Remote setmaxline, Remote setmgmtipaddr, Default is

Efficient Networks® Router family	Chapter 6: Remote Commands
Command Line Interface Guide

remote setmaxline

Sets the maximum links (1 or 2) for a DOD (dial on demand) connection, that is, a connection where the link goes up and down. These links include those for ISDN, L2TP tunnels, IPSec tunnels, and dial backup.

If you set the maximum links to 2, bandwidth on demand management determines their actual usage; see the remote setbwthresh command.

Mgmt Class

Network (R/W)

Input Format

remote setMaxLine 1 2 remotename>

Parameters

1 2	Maximum number of links to be used for the connection (1 or 2).
	The default is 1.
<remotename>a	Name of the remote router.

aASCII string

Response

Command prompt.

remote setmgmtipaddr

Assigns to the remote router entry, an IP address which is to be used for management purposes only and not for IP address translation. This management IP address is generally a private network address used solely by the ISP.

The management IP address is separate from the IP address used for IP address translation. The IP address used for address translation is generally a public IP address valid on the Internet. It is set by the remote setsrcipaddr command.

NOTE:

The management address is not effective until after the next save and remote restart or reboot.

Efficient Networks® Page 6-51