Efficient Networks 107-0001-000 manual Firewall setudpfloodthreshold, Firewall viewdroppkts

Efficient Networks® Router family	Chapter 18: Stateful Firewall Commands
Command Line Interface Guide

firewall setudpfloodthreshold

As a method to prevent a flooding of the system with User Datagram Protocol (UDP) packets, use this command set the threshold value for the number of UDP packets per second. When the specified threshold is exceeded, the firewall will block any subsequent UDP packets until the UDP traffic drops below the threshold value. For more information on UDP attacks, see “Stateful Firewall” on page 4-34.

Mgmt Class

Security (R/W)

Input Format

firewall setudpfloodthreshold <number>

Parameters

<number>a Threshold value in packets per seconds.

aInteger (1000)

Response

Command prompt.

firewall viewdroppkts

Displays a listing of up to 200 of the most recent dropped packets.

Mgmt Class

Security (R/W)

Input Format

firewall viewdroppkts <number>

Parameters

<number>a Specifies the number of dropped packets to display.

aInteger 1 - 200 (200)

Efficient Networks® Page 18-17