Efficient Networks 107-0001-000 manual Remote setppppretrytimer

Efficient Networks® Router family		Chapter 6: Remote Commands
Command Line Interface Guide
	Table 6-1: Remote Command Listing (Cont.)
	Command	Function
	remote setppppretrytimer	Enables or disables the PPP retry timer for a remote
		session.
	remote setprefer	Changes the interface for the remote entry.
	remote setprotocol	Sets the link protocol for the remote router.
	remote setpvc	Specifies the PVC number for connecting to the remote
		router.
	remote setrmtipaddr	Sets the WAN IP address for the remote router.
	remote setspeed	Specifies the speed to be used when dialing out using
		the backup V.90 modem connected to the console port.
	remote setsrcipaddr	Sets the IP address for the target WAN connection to
		the remote router.
	remote settimer	Sets the length of the timeout period before disconnec-
		tion.
	remote start	If the remote is not currently active, this command at-
		tempts to start an active session.
	remote stats	Shows the current status of the connection to the re-
		mote router, including the bandwidth and data transfer
		rate.
	remote stop	If the remote is active, this command stops the active
		session.
	remote unbindipvirtual-	Removes a remote route from the named IP virtual rout-
	route	ing table.

Efficient Networks® Page 6-5