Efficient Networks 107-0001-000 manual Ike ipsec policies set interface

Efficient Networks® Router family	Chapter 12: IKE/IPsec Commands
Command Line Interface Guide

ike ipsec policies set interface

Defines an interface filtering parameter value for the policy. The policy is only used when the specified interface is connected. For example, if the policy is to be used only when the Dial Backup remote is connected, you would specify the remote name as the interface for the policy. Otherwise, if the policy can be used regardless of the connected interface, specify the string none. (To read about Dial Backup, see “Dial Backup” on page 6-7.)

NOTE:

The specified interface must be the interface to the IKE peer.

This command is intended to allow the user to choose when to apply IPSec/IKE filters and incur the resulting encryption and authentication costs. With this command, you can limit a policy to a specific interface.

Mgmt Class

Security (R/W)

Input Format

ike ipsec policies set interface <interface all > <policyname>

Efficient Networks® Page 12-13