Efficient Networks 107-0001-000 manual Remote setcompression

Chapter 6: Remote Commands		Efficient Networks® Router family
		Command Line Interface Guide
	Table 6-1: Remote Command Listing (Cont.)
	Command	Function
	remote setcompression	Enables or disables negotiation of the Stac LZS com-
		pression of the payload (RFC 1974).
	remote setencryption	RFC 1969 encryption. Specifies a PPP DES (Data En-
		cryption Standard) 56-bit key with fixed transmit and re-
		ceive keys.
	remote setencryption	Diffie-Hellman Encryption. Specifies encryption based
		on the Diffie-Hellman key-exchange protocol.
	remote setipoptions	Enables or disables the selected IP option for the WAN
		interface.
	remote setipslaveppp	Sets the IP Slave PPP mode.
	remote setiptranslate	Controls Network Address Translation on a per remote
		router basis.
	remote setipxaddr	Sets the IPX network number for the remote WAN con-
		nection.
	remote setipxoptions	Enables or disables the IPX option RIPSAP for the re-
		mote WAN connection.
	remote setmaxline	Sets the maximum links (1 or 2) for a DOD (dial on de-
		mand) connection, that is, a connection where the link
		goes up and down.
	remote setmgmtipaddr	Assigns to the remote router entry, an IP address which
		is to be used for management purposes only and not for
		IP address translation.
	remote setminline	Sets the minimum number of channels to be continually
		allocated to the connection.
	remote setmtu	Sets the maximum transfer unit for the remote interface.
	remote setourpasswd	Sets a unique CHAP or PAP authentication password
		for the local router that is used for authentication when
		the local router connects to the specified remote router.
	remote setoursysname	Sets a unique CHAP or PAP authentication system
		name for the local router that is used for authentication
		when the local router connects to the specified remote
		router.
	remote setpasswd	Sets the CHAP or PAP authentication password that is
		used when the remote router establishes a connection
		or is challenged by the target router.
	remote setphone	Specifies the phone number to be used for the dial on
		demand (DOD) connection, that is, a connection where
		the link goes up and down.
	remote setpppoptions	Enables and disables a PPP option.

Page 6-4 Efficient Networks®