Efficient Networks 107-0001-000 manual Snmp list, Snmp enablesnmpif wanlan

Efficient Networks® Router family	Chapter 17: SNMP Commands
Command Line Interface Guide

Parameters

wan lan Interface from which SNMP access will be disabled.

Response

Command prompt.

snmp enablesnmpif

Enables SNMP access from the specified interface. To see the current interface(s) enabled, use the command snmp list.

NOTE:

This command does not require a reboot and is effective immediately.

Mgmt Class

Network (R/W)

Input Format

snmp enablesnmpif <wanlan>

Parameters

wan lan Interface from which SNMP access will be enabled.

Response

Command prompt.

snmp list

Displays current SNMP configuration information.

NOTE:

If changes to the SNMP configuration have been made since the last reboot, the changes will be displayed, but may not be in effect until after a save and reboot.

Mgmt Class

Network (R)

Efficient Networks® Page 17-7