Efficient Networks 107-0001-000 Lists the default modem settings, Deletes an http address filter

Efficient Networks® Router family		Chapter 4: System Commands
Command Line Interface Guide
	Table 4-1: System Command Listing (Cont.)
	Command	Function
	system backup successrate	Changes the minimum success rate required for a
		group of pinged addresses.
	system blocknetbiosdefault	Sets the default value used when a remote router
		entry is defined.
	system community	Enables changing the SNMP community name
		from its default value.
	system default modem	Lists the default modem settings.
	system delbootpserver	Removes an address from the BootP server list.
	system delhostmapping	Undoes an IP address/host translation (remap-
		ping) range
	system delhttpfilter	Deletes an http address filter.
	system deliproutingtable	Deletes a range of addresses that reference a vir-
		tual routing table or deletes the entire virtual rout-
		ing table.
	system delserver	Deletes an server entry.
	system delsnmpfilter	Deletes the SNMP client range.
	system delsyslogfilter	Renames a file in the file system.
	system delsyslogserver	Deletes the Syslog address filter.
	system deltelnetfilter	Deletes the Telnet client range.
	system deludprelay	Deletes the UDP port range.
	system history	Displays the router’s most recent console log.
	system httpport	Manages the system HTTP port access.
	system list	Lists the system settings for the target router.
	system log	Allows logging of the device’s activity in a Telnet
		session.
	system modem	Changes the selected modem setting.
	system moveiproutingtable	Moves a range of IP addresses to another virtual
		routing table.
	system msg	Sets or changes the message saved in the local
		router you are configuring.

Efficient Networks® Page 4-3