Efficient Networks 107-0001-000 manual Eth vrrp set multicast, Eth vrrp list port#

Efficient Networks® Router family	Chapter 5: Ethernet Interface Commands
Command Line Interface Guide

eth vrrp list

Lists the VRRP attribute records for the port and shows the status of the VRRP router. For more information, see “VRRP Backup” on page 6-16of the Technical Reference Guide.

Mgmt Class

Network (R)

Input Format

eth vrrp list [<port#>]

Parameters

<port#>a Physical Ethernet interface (port) number.

aThe default is 0; the parameter may be omitted if the router has only one port.

Response

Typical response listing the attribute records for the default port 0.

-> eth vrrp add 7

VRRP Records for Ethernet Port. 0

VRRP Record	VRID 8,	Priority 100,	Interval 1
	Flags: preempt, No Authentication
	Interface: ETHERNET/0:3
	Primary	WAN interface	is down

eth vrrp set multicast

Changes the multicast address used for VRRP router announcements. This address is used by all VRRP announcements from this router, regardless of VRID or port. For more information, see “VRRP Backup” on page 6-16of the Technical Reference Guide.

NOTE:

This command is not usually needed for VRRP configuration. Do not use this command unless you clearly understand its impact.

NOTE:

This command takes effect immediately, but you must save the change if it is to persist after you restart the interface or reboot the router.

Efficient Networks® Page 5-43