Efficient Networks 107-0001-000 manual Remote setmgmtipaddr ipaddr mask remotename, IP address

Chapter 6: Remote Commands	Efficient Networks® Router family
	Command Line Interface Guide

NOTE:

To use the management address as the source address for a ping, you must specify it using the -I option on the ping command. For example, to use management address 192.168.1.2 when pinging destination address 192.168.100.100, specify:

ping -I 192.168.1.2 192.168.100.100

NOTE:

To use the management address as the source address for a copy, you must specify both the source and destination addresses on the copy command.

To list the current management address for the remote router, if any, use the remote list. To set a management address for an Ethernet interface, see eth ip mgmt.

Mgmt Class

Network (R/W)

Input Format

remote setmgmtipaddr <ipaddr> <mask> <remotename>

Parameters

<ipaddr>a	IP address.
<mask>a	IP sub-network mask.
<remotename>b	Name of the remote router.

aDotted-decimal notation

bASCII string

Response

Command prompt.

Page 6-52 Efficient Networks®