Efficient Networks 107-0001-000 manual Remote ipfilter append, Remote ipfilter insert

Efficient Networks® Router family	Chapter 6: Remote Commands
Command Line Interface Guide

remote ipfilter

Manages the IP filters on the WAN interface. The filters screen IP packets at the interface level.

You can define filters for any entry in the remote router database. To see the names of the remote entries, use the command remote list.

A remote entry can have up to four lists of filters; the list types are Input, Receive, Transmit, and Output. For more information on how these filter types are applied, see “IP Filtering” on page 5-23.

NOTE:

IP filters take effect immediately upon entry. They can even affect the current connection that you are using to enter commands. Unlike other configuration changes, you do not need to save and restart or reboot

Mgmt Class

Security (R/W)

Input Format

remote ipfilter <command> <type> <action> <parameters> <remotename>

The following <command>s are provided for managing IP filters for the WAN interface:

remote ipfilter append

eth ip filter append [<line number>] <type> <action> [<parameters>] [<remotename>]

Appends a filter to the list of filters for this <type> (Input, Receive, Transmit, or Output) for this remote entry.

If no line number is specified, the filter is appended to the end of the list; otherwise, it is appended after the specified line. For example, “append 0” appends the filter after line 0. Filters are used in the order they appear in their list.

remote ipfilter insert

remote ipfilter insert <type> <action> <parameters> <remotename>

Inserts a filter in the list of filters for this <type> (Input, Receive, Transmit, or Output) for this remote entry.

Efficient Networks® Page 6-29