Efficient Networks 107-0001-000 manual Voice refreshcas active always, Mode, An idle state

Efficient Networks® Router family	Chapter 13: Voice Commands
Command Line Interface Guide

voice refreshcas

Defines the mode in which refresh CAS (channel associated signalling) cells will be sent to the voice gateway.

NOTE:

A mode change is effective immediately. However you must perform a save command if the change is to be persistent across reboots.

Mgmt Class

Voice (R/W)

Input Format

voice refreshcas active always

Parameters

***When entered with no parameter, the current mode is displayed

active	CAS refresh signals are sent only when voice is present. Default
	mode.
always	CAS refresh signals are sent both when voice is present and during
	an idle state.

Example

The following command example will change the refresh cas mode to always.

-> voice refreshcas always

The following command example entered with no parameters to display the current mode.

-> voice refreshcas

Refresh CAS signaling is currently "always".

Response

Command prompt.

Efficient Networks® Page 13-9