Efficient Networks 107-0001-000 manual Ike ipsec policies set proposal

Efficient Networks® Router family	Chapter 12: IKE/IPsec Commands
Command Line Interface Guide

ike ipsec policies set proposal

Defines a proposal filtering parameter value for the policy. The proposal parameter specifies an IKE IPSec proposal that may be used for the connection. (It must have been defined by IKE IPSec proposal commands; see “IKE IPSec Proposal Commands” on page 5-58.)

Unlike the other filtering parameters, the policy may allow more than one value for the proposal parameter. For example, two set proposal commands could specify two proposals, either of which could be used by the connection; see “IKE IPSec Policy Commands” on page 5-61.

Mgmt Class

Security (R/W)

Input Format

ike ipsec policies set proposal <proposalname> <policyname>

Parameters

<proposalname>a Name of an IKE proposal.b

<policyname>a Name of the IPsec policy to which the proposal parameter value is added.c

aASCII string

bTo see the IKE proposal names, use the ike ipsec proposals list command.

cTo see the policy names, use the ike ipsec policies list command.

Example

-> ike ipsec policies set proposal myproposal mypolicy

Response

Command prompt.

Efficient Networks® Page 12-17