Efficient Networks 107-0001-000 Ike proposals set dhgroup, No DH group is used, Use DH group

Efficient Networks® Router family	Chapter 12: IKE/IPsec Commands
Command Line Interface Guide

ike proposals set dh_group

Sets the IKE proposal parameter that specifies the Diffie-Hellman (DH) key generation group used (no group or group 1 or 2). See “IKE Proposal Commands” on page 5-58.

Mgmt Class

Security (R/W)

Input Format

ike proposals set dh_group <none 1 2> <proposalname>

Parameters

Choose one of the following:

none	No DH group is used.
1	Use DH group 1.
2	Use DH group 2.

<proposalname>a Name of the IKE proposal to which the DH group parameter is added.b

aASCII string

bTo see the proposal names in use, use the ike proposals list command.

Example

-> ike proposals set dh_group 2 my_ike_proposal

Response

Command prompt.

Efficient Networks® Page 12-41