Efficient Networks 107-0001-000 manual System addhostmapping, Command prompt

Efficient Networks® Router family	Chapter 4: System Commands
Command Line Interface Guide

system addhostmapping

Remaps a range of local-LAN IP addresses to a range of public IP addresses on a system-wide basis. These local addresses are mapped one-to-one to the public addresses.

NOTE:

The range of public IP addresses is defined by <first public addr> only. The rest of the range is computed automatically (from <first public addr> to <first public addr> + number of addresses remapped - 1) inclusive.

Automatic SNTP requests are generated if the system needs to get the time. You can specify an SNTP server using the command sntp server and a UTC offset with the command sntp offset.

Mgmt Class

Network (R/W)

Input Format

system addhostmapping <first private addr> <second private addr> <first public addr>

Parameters

<first private addr>a First IP address in the range of IP addresses to be remapped.

<second private addr>aLast address in the range of IP addresses to be remapped.

<first public addr>a Last address in the range of IP addresses to be remapped.

aDotted-decimal notation

Response

Command prompt.

Efficient Networks® Page 4-7