Efficient Networks 107-0001-000 manual Sets the IPX network number for the Ethernet LAN Connection

Efficient Networks® Router family		Chapter 5: Ethernet Interface Commands
Command Line Interface Guide
	Table 5-1: Ethernet Interface Command Listing (Cont.)
	Command	Function
	eth ipx addr	Sets the IPX network number for the Ethernet LAN
		connection.
	eth ipx disable	Disables IPX routing across the Ethernet LAN.
	eth ipx enable	Enables IPX routing across the Ethernet LAN.
	eth ipx frame	Sets the frame encapsulation method.
	eth list	Lists information about the Ethernet interfaces in-
		cluding the status of bridging and routing, IP proto-
		col controls, and IP address and subnet mask.
	eth mtu	Sets the maximum transfer unit for the Ethernet in-
		terface.
	eth restart	Starts a stopped logical Ethernet interface.
	eth start	Starts a stopped logical Ethernet interface.
	eth stop	Stops a logical Ethernet interface.
	eth vrrp add	Defines a VRRP attribute record for the VRID (vir-
		tual router ID).
	eth vrrp clear password	Clears the password in a VRRP attribute record for
		the VRID.
	eth vrrp delete	Deletes a VRRP attribute record for the VRID.
	eth vrrp list	Lists the VRRP attribute records for the port and
		shows the status of the VRRP router.
	eth vrrp set multicast	Changes the multicast address used for VRRP
		router announcements.
	eth vrrp set option	Specifies the preemption option in a VRRP at-
		tribute record for the VRID.
	eth vrrp set password	Specifies the password in a VRRP attribute record
		for the VRID.
	eth vrrp set priority	Specifies the priority attribute in a VRRP attribute
		record for the VRID.
	eth vrrp set timeinterval	Specifies the time interval attribute in a VRRP at-
		tribute record for the VRID.
	eth ip remsrcrouteopt	Adds or removes the source routing option.

Efficient Networks® Page 5-3