Efficient Networks 107-0001-000 List the supported SSH sub-commands, Configured SSH port, Mission

Efficient Networks® Router family	Chapter 19: SSH Commands
Command Line Interface Guide

CHAPTER 19

SSH COMMANDS

The commands in this section are used to Secure Shell (SSH) connections. For additional information Secure Shell, see SSH in Chapter 5, System Security.

The commands found in this section include:

	Table 19-1: SSH Command Listing
Command		Function
ssh ?		List the supported SSH sub-commands.
ssh keygen		Generates the Private-Public key-pair for the local
		server.
ssh list		Displays the current SSH configuration with the ex-
		ception of the list of public-private key pairs and the
		configured SSH port.
ssh load privatekey		Loads a precomputed private-key, from the speci-
		fied TFTP server.
ssh load publickey		Loads a precomputed public-key, from the speci-
		fied TFTP server.
ssh set encryption		Sets the type of encryption the SSH connections
		will use.
ssh set idletimeout		Sets the idle timeout period for SSH connections.
ssh set keepalive		Enables and disables keepalive messages trans-
		mission.
ssh set mac		Sets the type of message authentication code use
		for SSH connections.
ssh set rekey		Sets the interval between key re-exchange.
ssh set status		Enables and disables SSH connections.
system sshport		Manages system SSH port access.

Efficient Networks® Page 19-1