Efficient Networks 107-0001-000 manual Ike commit, Ike flush, Commit bit is not set. Default value

Chapter 12: IKE/IPsec Commands	Efficient Networks® Router family
	Command Line Interface Guide

ike commit

Determines whether the IKE commit bit is set. By default, the commit bit is not set (off).

If packets are not being processed correctly across an IPSec tunnel, try the command ike commit on so that the commit bit is set. Setting the commit bit makes sure that no IPSec traffic arrives at the router before the router is ready for it.

Mgmt Class

Security (R/W)

Input Format

ike commit [ on off help]

Parameters

***When entered with no parameter, the current value is displayed.

on	Commit bit is set.
off	Commit bit is not set. (Default value)
help	Displays help message.

Response

Command prompt.

ike flush

Clears all IKE configuration information from the router. For more information about IKE, see “IPSec (Internet Protocol Security)” on page 5-50.

Mgmt Class

Debug (R/W)

Input Format

ike flush

Parameters

None

Response

Command prompt.

Page 12-6 Efficient Networks®