Efficient Networks 107-0001-000 manual Remote addipxroute, IPX network number, Network/station

Efficient Networks® Router family	Chapter 6: Remote Commands
Command Line Interface Guide

remote addipxroute

Adds an IPX route for a network or station on the LAN network connected beyond the remote router. The target router’s routing information table must be seeded statically to access networks and stations beyond this remote router. After the connection is established, standard RIP update packets will dynamically add to the routing table. (Setting this address is not required if a target router never connects to the remote router and the remote router supports RIP.)

NOTE:

A reboot command must be performed on the target router for the addition of a static route to take effect.

Mgmt Class

Network (R/W)

Input Format

remote addIpxRoute <ipxne#> <metric> <ticks> <remotename>

Parameters

<ipne#>a	IPX network number.
<metric>b	Number of routers through which the packet must go to get to the
	network/station.
<ticks>b	Number in 1/8 seconds which is the estimated time delay in reach-
	ing the remote network or station.
<remotename>c	Name of the remote router.

aHexadecimal notation

bInteger

cASCII string

Response

Command prompt.

Efficient Networks® Page 6-11