Efficient Networks 107-0001-000 manual If entered with no parameters, all remote router entries

Efficient Networks® Router family	Chapter 6: Remote Commands
Command Line Interface Guide

Parameters

***	If entered with no parameters, all remote router entries
	are listed.
<remotename>a	Name of the remote router.

aASCII string

Response

Typical response:

-> rem list internet
INFORMATION FOR <internet>
Status	enabled
Our System Name when dialing out
Our Password used when dialing out...	no
Protocol in use	PPP
ATM traffic shaping	no
Authentication	disabled
Authentication level required	PAP
Use periodic LCP pings	yes
Connection Identifier (VPI*VCI)	0*38
IP address translation	off
IP filters defined	no
Send/Receive Multicast	off
Block NetBIOS Packets	off
Compression Negotiation	off
IP slave mode (PPP)	no
Try to reacquire IP addr (PPP)	yes
Source IP address/subnet mask	0.0.0.0/0.0.0.0
Remote IP address/subnet mask	0.0.0.0/0.0.0.0
Send IP RIP to this dest	no
Send IP default route if known	no
Receive IP RIP from this dest	no
Receive IP default route by RIP....	no
Keep this IP destination private	yes
Total IP remote routes	1
10.0.0.0/255.255.0.0/1
IPX network number	00000000
Use IPX RIP/SAP (negotiate with PPP):	yes
Total IPX remote routes	0
Total IPX SAPs	0
Bridging enabled	no

Efficient Networks® Page 6-35