Efficient Networks® Router family

Chapter 5: Ethernet Interface Commands

Command Line Interface Guide

 

 

 

Parameters

<vrid>a

Virtual route ID.

<interface>b

Ethernet interface. The default value is 0:0.

aInteger, 1 - 255

bTo specify a logical interface other than 0:0, specify both the port number (0 or 1) and the logical interface number using the format <port #>:<logical #> (for example, 0:1).

Example

This command example assigns VRID 7 to the logical Ethernet interface 0:1.

-> eth ip vrid 7 0:1

This command example clears the VRRP interface designation from interface 0:1.

-> eth ip vrid 0 0:1

Response

Command prompt.

eth ipx addr

Sets the IPX network number for the Ethernet LAN connection.

Mgmt Class

Network (R/W)

Input Format

eth ipx addr <ipxnet> [port#]

Parameters

<ipxnet>a

IPX network number.

<port>b

Port number of the Ethernet LAN.

a8 hexadecimal characters.

bInteger, 0, 1 or it may be omitted.

Response

Command prompt.

eth ipx disable

Disables IPX routing across the Ethernet LAN. This acts as a master switch allowing you to disable IPX routing for testing or control purposes.

Efficient Networks®

Page 5-33

Page 171
Image 171
Efficient Networks 107-0001-000 manual Eth ipx disable, Eth ipx addr ipxnet port#, Eth ip vrid 7, Eth ip vrid 0