Psion Teklogix 7530 G2 user manual Check Digit Algorithm, Enable Field Size/Chars

Chapter 5: Configuration

Decoded (Internal) Scanners

Check Digit Algorithm

When the Two MSI Plessey check digits option is selected, an additional verification is required to ensure integrity. Double-tapping on this parameter displays a dialog box in which you can choose the algorithm to be used: MOD 10/MOD 11 or MOD 10/MOD 10.

Field Size/Chars

Refer to page 148 for details.

5.11.3.16 Discrete 2 of 5

Enabled

Set this parameter to on to enable “Discrete 2 of 5”.

Set Length L1 And Set Length L2

Lengths for “Discrete 2 of 5” can be set for Any length, Length within a range, One discrete length or Two discrete lengths. The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s).

Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where you can define the code length that will be recognized by your scanner.

Choosing One discrete length allows you to decode only those codes containing a selected length. Choosing Two discrete lengths allows you to decode only those codes containing two selected lengths. Length within a range allows you to decode a code type within a specified range from 1 to 12.

Field Size/Chars

Refer to page 148 for details.

5.11.3.172D PDF-417(SE2223 only)

Enable

Setting this parameter to on enables PDF-417 two dimensional (2D) coding.

Field Size/Chars

Refer to page 148 for details.

170Psion Teklogix 7530 G2 Hand-Held Computer User Manual