Psion Teklogix 7530 G2 user manual 11.3.7 EAN, 11.3.8 EAN, EAN-8 Zero Extend, UPC-A, Check Digit

Chapter 5: Configuration

Decoded (Internal) Scanners

5.11.3.7 EAN 13

Enabled

Set this parameter to on to enable “EAN 13”.

Prefix/Suffix

See “Prefix/Suffix” beginning on page 151.

5.11.3.8 EAN 8

Enabled

Set this parameter to on to enable “EAN 8”.

EAN-8 Zero Extend

When this parameter is enabled, five leading zeros are added to decoded EAN-8 symbols, making them compatible in format to EAN-13 symbols. Disabling this parameter returns EAN-8 symbols to their normal format.

Prefix/Suffix

See “Prefix/Suffix” beginning on page 151.

5.11.3.9 UPC A

Enabled

Set this parameter to on to enable “UPC A”.

UPC-A, Check Digit

If you enable this parameter, the check digit is included with the decoded bar code data.

UPC-A, Preamble

When you double-tap on this parameter, a dialog box is displayed where you can choose one of three options for lead-in characters for UPC-A symbols transmitted to the host device: System Char – system character transmitted with the data, Country code and System Char – both the country code (“0” for USA) and system character are transmitted with the data or None – no preamble is transmitted. The lead-in characters are considered part of the symbol.

164Psion Teklogix 7530 G2 Hand-Held Computer User Manual