Psion Teklogix 7530 G2 Protocol Tab, Editing The Channel List, Enable Cellular Protocol

Chapter 5: Configuration

Protocol Tab

Editing The Channel List

Only those channels that are enabled are displayed in the dropdown menus in the Edit Channel List dialog box. The allowable values range from 0 to 20.

•Tap on the arrow next to dropdown menu to scroll through the available channels. Highlight the value you want to assign.

•Once you’ve assigned the switching order, tap on the OK button to close the dialog box.

The channel list is added to the selected channel in the Manual Switch Table dialog box.

5.10.3 Protocol Tab

Enable Cellular Protocol

The value assigned to this parameter must be identical to the value assigned to the corresponding parameter in the Psion Teklogix Network Controller, Wireless Gateway or Base Station. A warm reset of the 7530 G2 is required before this parameter can take effect.

If Enable Cellular Protocol is disabled (unchecked), the options in the Cellular Radio Address frame are displayed in grey text indicating that they cannot

be accessed.

138Psion Teklogix 7530 G2 Hand-Held Computer User Manual